Home Lý lịch khoa học TS. Trần Trung Thành

LÝ LỊCH KHOA HỌC

1. Thông tin cá nhân
2. Quá trình đào tạo:
Bậc đào tạo Nơi đào tạo Chuyên môn Tốt nghiệp
Đại học Đại học Khoa học Tự nhiên, Việt Nam Cơ học 2002
Thạc sĩ Đại học Công nghệ Hà Nội, Việt Nam Cơ học 2005
Tiến sĩ Đại học Quốc gia Jeju, Hàn Quốc Kỹ thuật cơ khí 2012
Tiến sĩ Đại học Old Dominion, Hoa Kỳ Kỹ thuật Hàng không 2016
3. Thành tích đào tạo:
Kỹ sư:
4. Thành tích NCKH & TKCN:
- Các sách, giáo trình, bài giảng đã xuất bản
  1. Kyung-Hyun Choi, Thanh T. Tran, Bong-Su Yang and Dong-Soo Kim, “Printing Pressure Control Algorithm of Roll-to-Roll Web System for Printed Electronics” Frontiers of Assembly and Manufacturing, pp. 187-226, Springer, 2010.
  2. Thanh T. Tran, Ganeshthangaraj P., Muhammad Zubair, and Kyung-Hyun Choi, “An Evolution Strategy Based Autonomous Algorithm for Roll-to-Roll Web Control System,” Advances in Intelligent Systems and Computing, Vol. 194, pp. 717-729, , Springer Berlin Heidelberg, 2013.
- Các đề tài NCKH & TKCN đã thực hiện
  1. L2F F2R L-59 Model: Control Design and Experiments, $5000, 04/2016 – 09/2016, Gonzalez R. (PI), Thanh T. Tran (Co-PI).
  2. Control Algorithm Development of Web Transport System for Printed Electronics, Jeju National University, South Korea, $40,000, 08/2008 – 08/2010, Choi K. H. (PI) and Thanh T. Tran (Co-PI).
  3. Optimization Problem and Applications for installing Oil Transport Pipe on seabed, Hanoi University of Mining and Geology, Vietnam, $1000, 01/2005-01/2006, Thanh T. Tran (PI).
- Các bài báo trong tạp chí:
  1. Thanh T. Tran and Brett Newman, “Back-Stepping Based Flight Path Angle Control Algorithm for Longitudinal Dynamics” in Journal of Guidance, Control, and Dynamics, submitted.
  2. Thanh T. Tran and Kyung-Huyn Choi, “Register Control Algorithm for Roll-to-Roll Web System Using the Lyapunov Based Design” in International Journal of Advanced Manufacturing Technology, submitted.
  3. Thanh T. Tran and Kyung-Hyun Choi, “A Back-Stepping Based Control Algorithm for Multi-Span Roll-to-roll Web System,” in International Journal of Advanced Manufacturing Technology, Vol. 70, No. 1, pp. 45-61, 2013. DOI 10.1007/s00170-013-5168-6.
  4. Thanh T. Tran, Kyung-Hyun Choi, Dong_Eui Chang and Dong-Soo Kim, “Web Tension and Velocity Control of Two-span Roll-to-roll System for Printed Electronic,” in Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 5, No. 4, pp. 329-346, 2011.
  5. Kyung-Hyun Choi, Thanh T. Tran, and Dong-Soo Kim, “Back-Stepping Controller Based Web Tension Control for Roll-to-Roll Web Printed Electronics System,” in Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 5, No. 1, pp. 7-21, 2011.
  6. Kyung-Hyun Choi, Thanh T. Tran, and Dong-Soo Kim, “A New Approach for Intelligent Control System Design Using the Modified Genetic Algorithm” in Int. J. Intelligent Systems Technologies and Applications, Vol. 9, No. 3/4, 2010
- Các bài báo trong HNKH:
  1. Thanh T. Tran and Oscar R. Gonzalez, “Learn-to-Fly Algorithm Development for L-59 Aircraft Model”, Preparation for the 2016 American Control Conference, July 6–8, Boston, MA, 2016.
  2. Thanh T. Tran and Newman, B., “Altitude and Flight Path Angle Control for Longitudinal Dynamics of F-16 Model Aircraft”, Preparation for the 2016 American Control Conference, July 6–8, Boston, MA, 2016.
  3. Thanh T. Tran and Newman, B., “Integrator-Backstepping Control Design for Nonlinear Flight System Dynamics,” Proceedings of the AIAA Guidance, Navigation, and Control Conference, AIAA 2015-1321, Kissimmee, Florida, 2015.
  4. Thanh T. Tran and Newman, B., “Nonlinear Flight Control Design for Longitudinal Dynamics,” Proceedings of the AIAA Guidance, Navigation, and Control Conference, AIAA 2015-1994, Kissimmee, Florida, 2015.
  5. Thanh T. Tran and Brett Newman, “Equivalence Between State Space Exact Linearization Based and Back-Stepping Based Design Approaches” AIAA GNC AIAA-2013-5102, 19-22 August, 2013, Boston, MA, 2013.
  6. Thanh T. Tran and Brett Newman, “Back-Stepping Based Flight Path Angle Control Algorithm for Longitudinal Dynamics” AIAA GNC 2012-4612, 13 - 16 August 2012, Minneapolis, Minnesota, 2012.
  7. Kyung-Hyun Choi, Thanh T. Tran, P. Ganeshthangaraj, K. H. Lee, M. N. Nguyen, J. D. Jo and D. S. Kim “Web Register Control Algorithm for Roll-to-roll System Based Printed Electronics” The 6th annual IEEE Conference on Automation Science and Engineering, Aug 21-24, 2010, pp. 867-872, Toronto, Canada, 2010.
  8. Kyung-Hyun Choi, Thanh T. Tran, Yang Bong-Su and Dong-Soo Kim “On a New Approach for Gravure/Offset Printing Pressure Control Algorithm Development Using the Full State Feedback Controller” IEEE ISAM2009, Korea, 2009.
  9. Kyung-Hyun Choi, Thanh T. Tran, Yang Bong-Su Dong-Soo Kim “A New Approach for Intelligent Control System Design Using the Modified Genetic Algorithm” Proceedings of ICITA2009, Hanoi, Vietnam, 2009.
  10. K. H. Choi, Thanh T. Tran and D. S. Kim, “A Control System Design of Automatically Tuning Controller for Roll-to-roll Web System Using the Modified Genetic Algorithm,” Proceedings of the 7th Asian Control Conference, Hong Kong, China, August 27-29, 2009.
  11. Kyung-Hyun Choi, Thanh T. Tran, and Dong-Soo Kim, “A Precise Control Algorithm for Single-Span Roll-to-roll Web System Using the Back-Stepping Controller” IEEE ISIE 2009, Korea, 2009.
  12. Kyung-Hyun Choi, Thanh T. Tran, Dong-Soo Kim, Jeong-Beom Ko, Su-Jin Kim, and Yang-Hoi Dohn “ A Lateral Control Algorithm for Roll-to-roll Web System Based on Back-Stepping Approach,” Proceedings of the KSME 2008 Fall Annual Meeting, pp. 1091-1097, Korea, 2008.
  13. P. Ganeshthangaraj, Kyung-Hyun Choi, Thanh T. Tran, and Dong-Soo Kim, “Methodology for Selection of the Scaling Factor for Tension Controller for a Web Handling System” Proceedings of Korean Society Manufacturing Production System, Spring April 2011, pp. 507-508, 2011.
  14. Nguyen Van Can, Thanh T. Tran, “The Experimental Study of Blasting to Determine the Suitable Element Size of Broken Rock,” Proceeding of the 17National Conference on Mining and Geology 2007, Hanoi, Vietnam, 2007.
5. Hướng nghiên cứu chính:
  • Primary Research Theme: Dynamics and Control
  • Secondary Research Theme: Aerodynamics and Flight Control
  • Third Research Theme: Computational  Intelligence
  • Fourth Research Theme: Manufacturing and Intelligent Systems
6. Khen thưởng:
  • Oktay Baysal Aerospace Scholarship, Batten College of Engineering & Technology, Old Dominion University, 2015.
  • Graduate Research Assistantship, Department of Electrical and Computer Engineering, Old Dominion University, Summer 2015.
  • College’s 2015 Faculty Award in Aerospace Engineering, Batten College of Engineering & Technology, Old Dominion University, 2015.
  • Oktay Baysal Aerospace Scholarship, Batten College of Engineering & Technology, Old Dominion University, 2014.
  • Best Paper Finalist in the 2012 AIAA GNC Conference Graduate Student Paper Competition. AIAA Guidance, Navigation, and Control and Co-located Conferences 13 - 16 August 2012, Minneapolis, Minnesota, 2012. (Six people are selected for receiving the award finalists).
  • Teaching Assistant Awards at Department of Mechanical and Aerospace Engineering in Fall 2012, Spring 2013, Summer 2013, Fall 2013, Spring 2014, Summer 2014, Fall 2014, Spring 2015, Summer 2015, Fall 2015, Old Dominion University, Norfolk, VA.
  • Vietnam Education Foundation fellowship (administered by U.S National Academies), 2010-2015. (40 Vietnamese fellows for the whole country per year).
  • PhD scholarship at Advanced Micro Mechatronics Laboratory, Department of Mechanical Engineering, Jeju National University, South Korea, 01/2008-12/2011.
  • The Leader of Youth Union with Excellent Achievements in Social Activities, Vietnam National University, Hanoi, Vietnam, 2002.
  • An Exemplary Figure of Vietnam National University, Vietnam National University, Hanoi, Vietnam, 2001.
  • The Third Prize of Olympic of National Mechanics: Ministry of Education and Training, Vietnam Mechanics Association, Vietnam Student Association, Hanoi, Vietnam, 2001.
 

Lý lịch khoa học